Hii I have 2 Magna Manual computers , looking for the PINOUT CONNECTIONS
mmal part no: md 362395
bosch part no: f005 e0 029
ECU is MR 507993, Bosch number F005 EO 0056
6G72 DOM 3.5 ( may be a typo on sticker)
Technical information, definitions, advice, and support for factory ECU remapping, aftermarket systems, and much more.
2 posts • Page 1 of 1
- Valued Contributor
- Posts: 536
- Joined: 09 Apr 2011, 23:22
- State: Australian Capital Territory
- Model: Mitsubishi Magna TJ AWD
- Engine: 3.5-Litre 6G74 V6 24V SOHC
If you can find a copy of the downloadable workshop manual, they're in that in the schematics section (by that I mean you have to trace the connections from the schematics).
The Ellery's Magna (2nd & 3rd gen) workshop manual has pin function tables but I haven't tried to confirm the accuracy.
I think this is a TH ECU; almost certainly an H8 type.
Yes, the 6G72 should be 6G74. I believe these were used in the very early TJ 3.5 manuals and are an SH2 type.
If the MD362395 is from a TH (one of the other stickers than the Bosch one, if still there, will give the body code which will indicate the model series - e.g. "THxD42" where the "x" is a numeral representing the powertrain; I think a 3.5 manual may be 8), they are fully interchangeable other than immobiliser coding.